KTM 890 Duke R – full spec of the Super Scalpel

New KTM 890 Duke R ups the game in performance and agility

The KTM 890 Duke R is effectively a high-performance version of the existing 790 Duke, with a fresh engine platform, a revised chassis and a number of other refinements. KTM says that the new bike “intends to exploit the best virtues of the Duke platform with more torque, more RPM, more speed, more stopping power and more aggression to make for an extreme experience receptive to open mountain roads and the expanses of the racetrack.”

The parallel twin engine is based on the 790 Duke, with the motor’s output increased to 119bhp (89kW) and 73lb-ft (99Nm) of torque, sprung from lower in the powerband. This represents a rise of almost 10Nm over the 790 Duke. In terms of engine ‘architecture’ the bore has been increased from 88 to 90.7 and the stroke lengthened from 65.7 to 68.8 with compression changing from 12,7:1 to 13,5:1.

Electronics on the new bike include cornering ABS and traction control with a new 6D lean angle sensor that not only detects the side-to-side and forwards and backwards pitch of the bike but also its drift positioning. Ride modes come as standard.

With the pillion footpegs removed and the single seat cover in place (as standard) the bike achieves a weight loss of 3.3kg over the 790 Duke.

Geometry of the 790 has not been hugely altered, but the ride height has been increased by 15mm to improve handling and ground clearance. This rise ensures that the swingarm angle is at a steeper angle to ensure better anti-squat behavior and thus improve stability and drive out of corners. The seat height is now at 834mm as a result of a more ‘attacking’ rider position, with the pilot placed marginally higher and further forward in order to intensify front end feel.

The 890Duke R will be available from £10,399 as soon as the borders open and the bikes arrive from Austria after the pandemic lockdown.

Specification KTM 890 Duke R

PRICE:                   £10,399

ENGINE:               890cc 2-cylinder, 4 stroke, DOHC Parallel twin

POWER:               119bhp (89kW) @ 9250 rpm

TORQUE:             73lb-ft (99Nm) @ 7750 rpm

SEAT HEIGHT:    834mm

DRY WEIGHT:     approx. 166kg

CONTACT:           www.ktm.com/gb